The detector is not designed for installation in industrial environments. The fire detectors should be installed by a trained installer with a valid Jablotron certificate. Therefore, a heat detector is integrated, which responds better to a fire developing heat quickly with a small amount of smoke. It is less sensitive to small particles produced by the burning of liquids such as e.g. It is very sensitive to particles that are present in thick smoke.

The optical smoke detector uses the diffused light principle. Ei Electronics Compatible Alarm, using an Ei Electronics download device. The product contains two separate detectors – an optical smoke detector and a temperature detector. To cancel a false alarm from a Smoke Alarm (which has its red light flashing.

for alarms reported by the system, sections can be set for which the alarm will be indicated.a fire alarm from the system (alarm triggered by another fire detector).Alarm Condition: When the alarm senses products of combustion and goes into alarm the red LED will flash one flash per second. a fire alarm detected by the detector itself The red LED (located under the TEST/Hush button) has four modes of operation: Standby Condition: The red LED will flash every 30-40 seconds to indicate that the smoke alarm is operating properly.The detector indicates a dangerous situation optically with an integrated light and a siren.

If the detector is operated without being assigned to a control panel or if communication with the control panel has been lost, it works in an autonomous mode (EN 14604). The detector communicates wirelessly and it is supplied by batteries (3x 1.5 V AA).

Download red smoke detector